Denon AVR-5800 Mode D'emploi page 4

ENGLISH
10 SURROUND
Playing modes for different sources
The AVR-5800/AVC-A1SE Upgrade is equipped with many surround modes. We recommend using the surround
modes as described below in order to achieve the maximum effect for the specific signal source.
Sources recorded in
Dolby Digital Surround EX
Sources recorded in DTS-ES
NOTE:
Surround modes indicated with an
asterisk (*) require the use of two
surround back speakers.
Dolby Digital
or
5.1 ch sources
DTS Surround
2 ch sources recorded in
Dolby Surround
Sources recorded in stereo
Sources recorded in monaural
• Though we recommend
selecting the surround
mode as described
above, other surround
modes can also be
selected.
4
is a 6.1-channel/7.1-channel surround mode.
THX SURROUND EX
• Maximum performance for playing movies on the AVR-5800/AVC-A1SE Upgrade.
DOLBY DIGITAL EX
• This mode is optimized for playing sources recorded in Dolby Digital Surround EX.
DTS-ES DSCRT 6.1, MTRX 6.1
• This is the optimum mode for playing sources recorded in DTS-ES.
THX DSCRT 6.1, MTRX 6.1
• When playing movies, setting this mode sometimes results in a more
natural sound. Select the mode as desired.
THX Ultra2 CINEMA* and THX MUSIC MODE*
• These modes are suited for playing 5.1-channel sources in 7.1 channels.
Select the desired surround mode for the movie and music sources.
WIDE SCREEN
• Effective for 2-channel sources recorded in Dolby Surround or for 7.1-channel
playback with 5.1-channel sources.
HOME THX CINEMA (THX 5.1)
• This mode is optimized for playing 5.1-channel movies.
• For sources recorded in Dolby Surround as well, this mode provides the
same power as with 5.1-channel sources.
DOLBY DIGITAL / DTS SURROUND / DTS 96/24
• This mode is optimized for playing 5.1-channel music.
• For Dolby surround recording sources, Dolby Pro-Logic II playback is
conducted.
PURE DIRECT
• By suspending all the video circuits, analog input music playback can be
played with optimum quality. (The video outputs do not operate.)
DIRECT / STEREO
• Effective for achieving pure playback.
• If there is no need for tone control or distribution of the low frequencies in
function of the speaker configuration, select the DIRECT mode to achieve the
best sound quality.
DENON Original Surround Modes
• Select these for 7.1-channel playback with sources recorded in stereo or
monaural.
• The effects are different for each of the surround modes.
Select the one most suited for the source being used.
DTS NEO:6
• This is a surround mode for playing 6.1- or 7.1-channel stereo sources
developed by Digital Theater Systems.
• One of two playing modes, MUSIC (for music sources) or CINEMA
(for movie sources), can be selected according to your preferences.
DOLBY PROLOGIC II
• This surround mode plays stereo sources developed by Dolby Laboratories
in 5.1 channels.
• Select one of the three playback modes according to your tastes.
THX Surround EX / Home THX Cinema mode
When the HOME THX CINEMA button is pressed, the surround mode is set as follows according to the signal
that is played:
q THX Surround EX (THX Ultra2 Cinema)
w Home THX CINEMA
e THX 5.1
r THX DSCRT 6.1, THX MTRX 6.1
When the HOME THX CINEMA mode is set when a DVD is played, check the DVD player's digital output setting
and change the setting to one for which Dolby Digital and DTS bit stream signals can be output ("bit stream",
for example).
[1] Playing sources recorded in Dolby Surround in the Home THX Cinema surround mode
1
q Select the input source.
INPUT SELECTOR
(Main unit) (Remote control unit)
w Set the input mode to "AUTO".
INPUT
MODE
(Main unit) (Remote control unit)
2
Select the Home THX Cinema mode.
HOME
THX CINEMA
(Main unit) (Remote control unit)
3
Play a program source with the
mark.
• For operating instructions, refer to the
manuals of the respective components.
4
Adjust volume.
MASTER VOLUME
(Main unit) (Remote control unit)
5
Display the Surround Parameter screen and set the parameters according to
the source.
(Remote control unit)
1-q 4
2 1-w
3
1-q
5, 7
1-w
6
4