Incorrect Operation - Columbus McKinnon TIGRIP THK Serie Mode D'emploi

12
Two-legged lifting gear is only suitable for small plates with low weights, for which sway during
transport can be compensated by hand. When attaching the load lifting attachment, it must be
ensured that the centre of gravity of the load is in the middle between the load lifting
attachments so that no inclined position is caused. In combination with a spreader beam, two
sets of two-legged lifting gear are suitable for universal applications.
Always transport the load slowly, carefully and close to the ground.
Only use crane hooks with a safety latch.
The suspension eye of the load lifting attachment must have sufficient space in the crane hook
and be freely articulating.
In the case of malfunctions, stop using the load lifting attachment immediately.
I O
NCORRECT PERATION
(list not complete)
Do not exceed the rated load capacity (WLL) of the unit.
Only loads within the specified jaw capacity must be picked up.
The load weight must not be less than 10% of the specified load capacity, as otherwise the
clamping force required for safe transport will not be reached (TBL 1,5 plus = 100kg).
The clamps must be arranged on the load in such a way that inclination angle β never is larger
than 30° in the direction of the common suspension eye.
max. 30° max. 30° max. 30° max. 30°
Any modifications of the load lifting attachment are prohibited.
It is forbidden to use the load lifting attachment for the transportation of persons.
When transporting loads ensure that the load does not swing or come into contact with other
objects.
©
2016 Columbus McKinnon Industrial Products GmbH