LEXIBOOK Meteoclock PURE SM1670 Mode D'emploi page 21

Multiple sensor use
The channel function allows you to use up to 3 additional sensors. The main unit can identify
each remote sensor thanks to their assigned channel (channel 1, 2 or 3). If you have one or two
additional sensors, you can place them in a different location in your house; in a bedroom, for
example. Your main unit can collect the temperature and humidity data of up to three remote
sensors.
1. Make sure you set each sensor to a different channel.
2. Press the TX key inside the remote sensors to synchronize them manually with the main unit.
The weather station will detect automatically the new sensors.
Note: it may take up to 1 minute before the main unit displays the readings.
3. Press the "CHANNEL" key repeatedly to select the desired outdoor channel between the
3 available channels (
4. The data of the corresponding remote sensor will be displayed on the main unit's LCD screen.
To display successively the readings from all 3 remote sensors, press the "CHANNEL" key
repeatedly until the
1. Press and hold the "MODE/SET" key until the weather station plays a "beep" sound and the
hour's digits start flashing.
2. Use the " /(12-24)" and "
press "MODE/SET" to confirm and adjust the next setting.
3. The setting sequence is displayed in the following order:
Hours Minutes
language Country
4. Press the "MODE/SET" key to confirm your selection and go back to time display.
5. Use the " /(12-24)" key to toggle between 24hr or 12hr display.
Note:
• The time zone is set on "0" by default. You can change this setting when traveling in a city located
in a different time zone from yours.
• The day of the week can be displayed in 8 different languages: English (EN), French (FR), Italian
(IT), Spanish (ES), German (GE), Danish (DA), Dutch (NL) or Russian (RU).
• You need to set the time after replacing the batteries.
• After a few seconds of inactivity, the unit will go back to time display mode.
).
icon is displayed on screen.
CLOCK AND DATE SETTING
/ALARM ON-OFF" keys to increase or reduce the values, then
Seconds
City Time zone
Year Month Date Day-of-week
21