Assembling And Adjustments - McCulloch M40-110 CLASSIC Manuel D'utilisation

ASSEMBLING AND ADJUSTMENTS

General
IMPORTANT! Prevent unintentional
!
starting by removing the ignition cable
from the spark plug.
Handle
Assembly
Top handle
Place the handlebar's tubular construction in direct
opposite to the lower part of the handlebar. Tighten the
knobs properly.
Use enclosed straps to secure cables to the handle. Do
not overstretch cables when mounting.
Cutting height
NOTICE! Do not set the cutting height too low as there
is a risk that the cutters might hit ground with
unevenness.
Move the lever to the back for higher cutting height and to
the front for lower cutting height.
M40-110 CLASSIC, M46-110 CLASSIC and M46-110R
CLASSIC has four controls, one for each wheel.
58 – English
All manuals and user guides at all-guides.com
Catcher
Assembly of the catcher
1
2
Mulcher insert
•
Hook the spring in the frame.
Filling with oil
•
Put the grass catcher frame into the grass bag with
the rigid part of the bag on the bottom.
Secure the grass bag to the frame by using the quick-
action clips.
Raise the discharge guard to mount / dismount the
mulch plug.
The oil tank is empty at delivery. Fill the oil slowly. See
instructions under the heading Maintenance. The
engine oil should be changed according to the engine
manual.