Configuration - YORKVILLE EXM Mobile SUB Mode D'emploi

Introduction
The EXM MobileSUB is the first-ever lithium ion battery powered subwoofer in pro audio history.
An easy-to-setup addition to any P.A., the EXM MobileSUB extends the bass of a typical sound
system with the least amount of complication.

Configuration

The Yorkville Sound EXM MobileSUB may be used in several different configurations. The basic system
is a single EXM MobileSUB used with a pair of full range loudspeakers, typically the Yorkville Sound
EXM Mobile/Mobile8/Mobile12. Multiple EXM MobileSUBs can also be used along with multiple full
range enclosures if more bass output is required. The EXM MobileSUB accepts and combines signals
from stereo line level sources and mono sources.
Multiple EXM MobileSUBs can be daisy chained through the Link jacks while full range loud-
speakers will be fed a properly filtered signal from the High Pass Output jacks.
HP o/p
HP o/p
HP o/p
MONO w/SUB MONO w/SUB
(Single System)* (Single System)*
HP o/p HP o/p
STEREO w/1x SUB
(2x EXM Mobiles)*
HP o/p HP o/p
STEREO w/2x SUBs
(2x EXM Mobiles)*
1
EXM
HP o/p
Bluetooth®
HP o/p
STEREO w/1x SUB
(2x EXM Mobiles)*
Bluetooth®
HP o/p
STEREO w/2x SUBs
(2x EXM Mobiles)*
Bluetooth®
*Note: Use corresponding
Input and High Pass Output
image-exmmobileSUB-configurations-00-1v0