Bluetooth Operation; Level Control - YORKVILLE EXM Mobile SUB Mode D'emploi

Pair ing:
Hold for
M A I N I N P U T S
4 seconds
then release
Ac tiv ity
Aux In
Bluetooth™
The Yorkville EXM MobileSUB is capable of Bluetooth™ audio streaming from devices such as
smart phones, tablets and laptops. Pairing your device with an EXM MobileSUB is simple and
gives you the freedom to play your music wirelessly.
The EXM MobileSUB also supports wireless stereo pairing between two EXM MobileSUB units.
One unit will act as the "Primary" unit, playing the left channel of the audio and maintaining the
connection to your device, while the other unit will act as a "Secondary" unit, playing the right
channel. You only need to connect your device to the Primary EXM MobileSUB unit to enjoy high
quality wireless stereo playback. See "Stereo Mode" below.
Bluetooth™ Operation
When the EXM MobileSUB is powered on, Bluetooth™ will be disabled by default. To enable it
and connect to your device, simply tap the Bluetooth™ button. If a device was previously con-
nected to the EXM MobileSUB, it will attempt to automatically reconnect. Similarly, if a wire-
less stereo connection was previously established, both EXM MobileSUB units used will attempt
to automatically re-establish the wireless stereo connection (in the same Primary or Secondary
role they previously performed).
Pairing
To pair your device to an EXM MobileSUB, simply press the Bluetooth™ button down and hold for 4
seconds, then release the button.
Status
The blue status indicator alerts let you know the current status of the Bluetooth™ con-
nection as described in this chart:
Mode Linked Link-Back
ON ON, blinks 1x every
Standalone
2 seconds.
Stereo Primary N/A ON, blinks 1x every
2 seconds.
N/A N/A
Stereo Secondary

Level Control

Streamed music volume can be changed only via the connected Bluetooth™ device.
Stereo Mode
The EXM MobileSUB supports wireless stereo playback between two EXM MobileSUB cabinets, for
an enhanced listening experience. One cabinet will act as the Primary unit, while the other acts
as a Secondary unit. The Primary unit will play the left audio channel of streamed music, and
also maintain the Bluetooth™ connection with your device, while the Secondary unit will play
the right audio channel. Your device only connects to the Primary unit, not the Secondary.
To enable Stereo Mode, simply double tap the Bluetooth™ button on the EXM MobileSUB that
should act as the Primary unit (left channel), then double tap the Bluetooth™ button on the
other EXM MobileSUB (right channel). The order matters, as the first unit double tapped will be-
S U B L E V E L H I G H P A S S O U T P U T S
Fully Charged
Charging
Standby Pairing
Flashes 1x every 2 Flashes 2x per
seconds second
Flashes 2x every 2 Flashes 3x per
seconds second
N/A N/A
2
EXM
O U T P U T
Full Range
100Hz
POWER
Stereo Grouping Grouped
N/A
Double flash ON
Double flash Slow flash