Connecting An Hdmi Device; Connecting A Component Video Device - Insignia NS-LCD26-09CA Guide De L'utilisateur

Insignia NS-LCD26-09CA 26" LCD TV 720p
To connect cable TV with a
converter/descrambler box:
• Use the following illustration to connect a
converter/descrambler box. (The RF switch
and the signal splitter are not provided.)
Set the RF switch to the A position to tune to
unscrambled channels using your TV remote
control. Set the RF switch to the B position to
tune to scrambled channels using the
converter/descrambler controls.
RF switch
A
B
Out
TV
Cable converter/descrambler box

Connecting an HDMI device

Your TV has two HDMI jacks. You can connect
an HDMI device to either jack.
An HDMI connection provide the best video
image.
HDMI is the leading new standard for digital
video and audio interconnection. You can
connect HDMI devices such as a set-top box,
DVD-R or DVD player, or DVI-equipped device
such as a computer.
To connect any HDMI device:
1 Connect one end of an HDMI cable (not
included) to the HDMI 1 or HDMI 2 jack on
the back of your TV.
Note
To connect a DVI device such as a computer,
connect an HDMI to DVI adapter to the HDMI
cable, then connect the DVI end of the cable to the
DVI device.
HDMI cable
HDMI 2 HDMI 2 HDMI 1
AUDIO AUDIO Y Y
COMPONENT COMPONENT
Two-set signal splitter
In
PC IN PC IN
VGA VGA
750 750
AV 1 IN AV 1 IN
Pb Pb Pr Pr VIDEO VIDEO L L R R S-VIDEO S-VIDEO
L L R R VIDEO VIDEO L L R R
AV OUT AV OUT
www.insignia-products.com
2 Connect the other end of the cable to the
HDMI OUT jack on the video device.
3 Press HDMI repeatedly to select the HDMI
display mode.
Note
Your TV supports HDCP (High-bandwidth Digital
Content Protection).This is a system for protecting
DVD content output through a DVI connection
from being copied. It provides a secure digital link
between a video source (such as DVD player or
computer) and your TV. Content is encrypted at
the source device to prevent unauthorized copies
from being made.
Digital devices from different manufacturers may
have different output standards.Your TV may not
be able to display the video output from these
devices correctly.
If your TV does not detect the signal from the
HDMI device, turn off the HDMI device, then turn it
on again.
To get an optimal video image, that you set your
DVD player to 1280 × 720p @ 60 Hz.

Connecting a component video device

A component video connection provides a better
video image than an S-Video or composite video
connection.
To connect a component video device:
1 Connect one end of a component video cable
(not included) to the Y, Pb, and Pr jacks on
the back of your TV.
Component
video cable
HDMI 2 HDMI 2 HDMI 1 HDMI 1
AUDIO AUDIO Y
COMPONENT
2 Connect the other end of the cable to the
COMPONENT OUT video jacks on the video
device.
3 Connect an audio cable to the COMPONENT
L and R audio jacks on the back of your TV.
4 Connect the other end of the cable to the left
and right AUDIO OUT jacks on the video
device.
5 Turn on your TV, then press SOURCE on the
front of your TV or INPUT on the remote
control repeatedly to select Component.
PC IN PC IN
VGA VGA
750 750
AV 1 IN AV 1 IN
Pb Pr VIDEO VIDEO L L R R S-VIDEO S-VIDEO
L R VIDEO VIDEO L L R R
AV OUT AV OUT
Audio cable
7