Assembly; Operation - Gardena SmallCut 300 Mode D'emploi

3. Assembly

Assembling the Turbotrimmer :
3
2

4. Operation

Risk of injury !
Connecting the Turbotrimmer :
1 7
6
Working position :
1
3
2
All manuals and user guides at all-guides.com
1. Fit the upper part of the handle
2
trimmer
not be stretched or trapped when doing this.
2. Put the additional handle
1
handle until it clicks into place.
1
3. Put the cover
part of the trimmer
feeding the cutting filament
through the opening in the
4
cover .
4. Put the cover
part of the trimmer
connection (3 snap fittings)
clicks into place.
Risk of injury if the Turbotrimmer does not switch off when
you release the start button.
V Never bypass the safety devices or switches (e.g. by
tying the safety lock to the handle).
1. Insert the extension cable
part of the handle
2. Plug the plug
extension cable.
3. Plug the extension cable into a 230 V mains power supply.
8
9
v Hold the trimmer by the top of the handle
handle so that the cutting head
The cutting filament extends completely automatically each
time the trimmer is switched on. The filament cassette must
be replaced when the filament has been used up. In order to
avoid unnecessary filament use, we recommend that you do
not turn the unit on and off excessively.
Avoid the filament coming into contact with hard objects (walls,
stones, fences etc.) to prevent the filament welding together or
snapping off.
1
together until they click into place. The cable must
3
onto the upper part of the
4
onto the lower
2
while
5
4
onto the lower
2
until the
6
into the cable lock
1
.
8
of the trimmer into the socket
2
and the lower part of the
4
2
7
on the upper
9
of the
1
and the additional
is tilted slightly forward.
5
11