Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operation and use
EN
46
All manuals and user guides at all-guides.com
Place the milk container (1) onto the base plate (6).
‹
Insert the mains plug of the connecting cable (7) into the
‹
mains socket.
Switch on the device as described in the section
‹
on by briefly pressing the ON switch (3).
Wait until the milk is warmed up and frothy and the device
‹
switches itself off (the control lamp in the ON switch (3) goes
out).
NOTE
Depending on the quantity, the frothing process can take
►
approx. 1-2 minutes.
The more milk is poured into the device, the longer the
►
frothing process takes.
CAUTION
Risk of overheating.
Continued use of the device without allowing it to cool down
can lead to overheating and cause damage to the device.
Do
not press the ON switch (3) after the device has auto-
►
matically switched itself off.
Do press and hold the ON switch (3) for longer periods of
►
time.
DANGER
Danger of burns from hot surfaces /
danger of scalding from hot milk!
Do not touch the hot milk container and only use the handle
►
(2) to pick it up.
Move the milk container slowly and carefully so that hot milk
►
does not spray or spill out.
BEEM - Elements of Lifestyle
Switching
Publicité
Table des Matières
