Installing The Receiver; Universal Remote Control - Marmitek TV ANYWHERE Guide Utilisateur

2.3 Installing the receiver

1. C onnect the RCA cable to the A/V output on the TV Anywhere receiver [15] to a TV A/V
input. Match the color of the plugs with the color code on the jacks of the receiver.
2. If connected to the Scart input use the Scart adapter marked "Receiver"
3. Select the corresponding channel [16] with your transmitter (set both units to e.g. "C").
4. Connect the small power adapter to the TV Anywhere receiver [17].
5. Switch on the unit with the ON/OFF switch [18]. The red indicator lights up.
6. Direct the flat antenna [8] at the transmitter.
! To receive the signals from your TV Anywhere, switch the TV connected to your TV Anywhere
receiver (remote TV) on to the A/V channel (on some TV's use channel "0"). If connected and if
no channel is programmed on your TV Anywhere a blue screen will appear.

2.4 Universal Remote Control

1. Open the battery compartment on the back of the remote.
2. I nsert 2 batteries (AAA size, not included). Note the correct polarity/position.
3. Close the battery compartment.
2.5. Button descriptions Remote Control
[1] (On/Off)
Allows you to turn off the device last selected. Some devices can
also be turned on by pressing this button.
[2] RED LED indicator
The indicator light flashes when the remote control is operating
or is continuously lit when programming the remote.
[3] CBL (TV Anywhere), TV, VCR, DVD, ASAT (analogue
satellite receiver), DSAT (digital satellite receiver)
These buttons allow you to select the device you wish to
control.
[4] MUTE (Volume off)
Turns the sound on or off
[5] PROG +/-
Select the next or the previous channel of your TV or SAT. In
DVD mode: next or previous chapter.
[6] VOL +/-
Adjusts the volume. You can turn the volume of your devices
up or down.
[7] SETUP
Allows you to program your remote control before the first use.
It also allows you to access to secondary functions of certain
A/V equipment (Shift). Press SETUP followed by the function
button you want to set.

All manuals and user guides at all-guides.com
2
4
6
7
11
12
14
17
19
21
© MARMITEK
1
3
5
8
9
10
13
15
16
18
20
22