Technical Specifications; Main Technical Parameters - Omcan Santos 50 Manuel D'instructions

Technical Specifications

MAIN TECHNICAL PARAMETERS

Model
Production per Hour
Power
RPM
Electrical
Current
Weight
Packaging Weight
Dimensions
Packaging Dimensions
Item Number
Operation
USING:
Caution: the fruits used must be washed carefully before being pressed.
Assembly and preparation:
1. Fit the bowl (4) on the bowl centering device (7) making sure that the juice run-off spout is located in the
indent provided for this at the front of the bowl centering device, Fig.4.
2. Place the basket assembly (5) in the bowl (4), making sure it is located properly on the drive unit (17). It
should go into place automatically by gravity but the position of the basket in the bowl should be checked
when in place. Fig.5.
3. Fit the cover (2) on the bowl (4) making sure that when it is fitted the cover outlet is lined up with the bowl
outlet. Fig.6.
4. Turn the cover clamping assembly round towards the feed channel with the clamping handle (1) raised,
until it is above the two notches on the side of the cover (2). Fig.7.
5. Turn the clamping handle round (1) downwards to clamp the cover (2) Fig.8.
6. Place the fruit plunger (3) in the cover feed channel (2) and check that the underside of the plunger collar
rests against the top of the cover feed channel.
7. Position the pulp container (6) correctly relative to the cover outlet (2), the bowl (4) and the machine stand
(8).
8. Connect the supply cord plug (10) to your mains supply socket.
9. Withdraw the fruit plunger (3) from the cover feed channel (2).
Santos 50
100L / 105.67 QT
800 W / 1 HP
3600
120V / 60Hz / 1
7A
31 lbs. / 14 kgs.
35 lbs. / 16 kgs.
19" x 10" x 18" / 483 x 254 x 457mm
20" x 12" x 22" / 508 x 305 x 559mm
39494
8