Asus Pundit-AE3 Guide De Démarrage Rapide page 6

3. Insert one retention clip hook to
the hole at the other side of the
retention module.
4. Carefully press down the retention
clip locking lever until the hook
attaches to retention module
hole.
5. Install the second retention clip.
Make sure that the retention clip
locking levers are on opposite
corners of the CPU fan.
6. Connect the CPU fan cable to the
CPU fan connector on the
motherboard.
Installing a DIMM
1. Locate the DIMM sockets in the
motherboard.
2. Unlock a DIMM socket by
pressing the retaining clips
outward.
3. Align a DIMM on the socket such
that the notch on the DIMM
matches the break on the
socket.
6 6 6 6 6 Q u i c k I n s t a l l a t i o n G u i d e Q u i c k I n s t a l l a t i o n G u i d e
Q u i c k I n s t a l l a t i o n G u i d e Q u i c k I n s t a l l a t i o n G u i d e Q u i c k I n s t a l l a t i o n G u i d e
U n l o c k e d U n l o c k e d U n l o c k e d U n l o c k e d U n l o c k e d
r e t a i n i n g c l i p r e t a i n i n g c l i p
r e t a i n i n g c l i p r e t a i n i n g c l i p r e t a i n i n g c l i p
D D R D I M M n o t c h D D R D I M M n o t c h
D D R D I M M n o t c h D D R D I M M n o t c h D D R D I M M n o t c h