Samsung HT-F9730W Guide D'utilisation page 34

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Media Play
If there is more than one movie on
the disc or device, select to start a
different title.
1.
Select Search Titles, and
Search Titles
then press the E button.
2.
Use the ▲▼ buttons to select
a title, and then press the E
button.
Select to play the chapter of your
choice.
1.
Select Search Chapters, and
Search
then press the E button.
Chapters
2.
Use the ▲▼ buttons to select
a chapter, and then press the
E button.
Select to play the movie from a
selected time point.
1.
Select Search Time bar, and
then press the E button.
2.
Using the number buttons,
enter the time point you want
to go to, and then press the
Search Time
E button.
bar
| NOTES |
\
You can also use the ◄►
buttons to advance or rewind
the movie. The movie advances
or rewinds one minute each time
you press the ◄► buttons.
Select to repeat a title, chapter, or
specific section.
- Off : Select to return to normal
playback.
- Title : Choose to repeat a
selected title.
- Chapter : Choose to repeat a
specific chapter.
- Repeat A-B : Choose to repeat
a specific section.
Repeat Mode
1.
Press the ▲▼ buttons to
select repeat A-B, and then
press the E button.
Press the E button at the
2.
point where you want repeat
play to start (A). Let the movie
play.
Press the E button at the
3.
point where you want repeat
play to stop (B).
34
|
English
| NOTES |
\
You must set point (B) at least
5 seconds of playing time after
point (A).
Select to set the picture mode.
- Dynamic : Increases sharpness
and brightness.
- Standard : Choose this setting
for most viewing applications.
- Movie : The best setting for
watching movies.
Picture Mode
- User : Lets you adjust the
sharpness and noise reduction
function respectively.
| NOTES |
\
When you use the BD Wise
function, this menu will not
appear.
Equalizer
Select to use the Equalizer.
Mode
Select to set the Equalizer.
Equalizer
| NOTES |
Settings
\
It only appears when equalizer
mode is on.
Select to set the desired audio
Audio
language.
In some cases when the product is
connected to a digital TV, the audio
signal may not synchronize with the
Audio Sync
video signal. If this occurs, adjust
the audio delay time to match the
video signal.
Select to set the desired subtitle
language.
- You can also operate this
Subtitle
function by pressing the
SUBTITLE button on the remote
control.
Subtitle
Select to set the desired subtitle
Settings
options.
To view a scene from another
angle. The Angle option displays
Angle
the number of angles available to
view (1/1, 1/2, 1/3, etc.).
BONUSVIEW
Video
Select to set the desired Bonusview
option.
BONUSVIEW
Audio

Publicité

Table des Matières
loading

Table des Matières