Samsung HT-F9730W Guide D'utilisation page 22

Settings
Smart Hub Lets you select the optimal size for
Screen Size the Smart Hub Screen.
Lets you set the color space format
HDMI Color for the HDMI output to match the
Format capabilities of the connected device
(TV, monitor, etc).
Lets you set the product to output
video from the HDMI OUT jack with
HDMI Deep
Deep Color. Deep Color provides
Color
more accurate color reproduction
with greater color depth.
Progressive Lets you improve picture quality
Mode when viewing DVDs.
Audio
Lets you adjust the following
speaker settings and turn the test
tone on and off so you can test the
speakers.
Level: Lets you adjust the relative
loudness of each speaker from 6db
to -6db. For example, if you like
deep bass, you can increase the
loudness of the subwoofer by 6db.
Speaker
Distance: Lets you adjust the
Settings
relative distance of each speaker
from the listening position up to 9
meters. The farther the distance,
the louder the speaker will be.
Test Tone: Lets you run the Test
Tone function so you can test your
adjustments. Setting Test Tone to
On turns the Test Tone on. Setting it
to Off turns it off.
When you run Auto Sound
Calibration, the product
Auto Sound
automatically creates a 7.1 channel
Calibration
sound field optimized for your
environment. See page 25.
Lets you configure the Equalizer
Equalizer
settings manually.
Lets you set the product so that
the volume remains stable when a
Smart Volume
scene change occurs or when you
change the channel.
Lets you select which speakers you
Speaker
want active, either the TV's speakers
Selection
or the home theater's speakers.
22
|
English
Lets you direct the sound from the
TV to the Home Theater speakers.
Requires an HDMI connection and
an Audio Return Channel (ARC)
compatible TV.
• If Audio Return Channel is set to
on and you are using an HDMI
Audio Return
cable to connect the product to
Channel
the TV, digital optical input will not
work.
• If Audio Return Channel is set to
auto and you are using an HDMI
cable to connect the product to
the TV, ARC or digital optical input
is selected automatically.
Lets you set the Digital Output to
match the capabilities of the AV
receiver you've connected to the
Digital Output
product. For more details, please
refer to the digital output selection
table. (See page 54)
Lets you apply dynamic range
control to Dolby Digital, Dolby
Digital Plus, and Dolby TrueHD
audio.
Auto: Automatically controls the
dynamic range of Dolby TrueHD
audio, based on information in the
Dynamic Dolby TrueHD soundtrack. Also
Range turns dynamic range control off for
Control Dolby Digital and Dolby Digital Plus.
Off: Leaves the dynamic range
uncompressed, letting you hear the
original sound.
On: Turns dynamic range control on
for all three Dolby formats. Quieter
sounds are made louder and the
volume of loud sounds is reduced.
Lets you select the multi-channel
downmix method that is compatible
Downmixing with your stereo system. You
Mode can choose to have the product
downmix to normal stereo or in
surround compatible stereo.
When the product is attached to a
digital TV, lets you adjust the audio
Audio Sync delay so that the audio syncs with
the video. You can set the delay
between 0 and 300 milliseconds.