Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Care & Maintenance
Clean the Roller Brush Cover
1. As shown in the figure, press the roller
brush cover release buttons on both
sides outward to remove the roller brush
cover.
3. The cover must be thoroughly dried
before use.
* Clean it as needed.
2. Rinse the roller brush cover with clean
water until it is clean.
4. Align the brush cover with the right
slot on the vacuum and press the cover
down until you hear a click.
EN
咔哒
Click
13
Publicité
Table des Matières
