Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Charging
Note: Fully charge the vacuum before using it for the first time.
1. Place the charging base on the level ground against a wall. Connect one end of the
power adapter to the charging base and another end to a home socket.
2. Place the vacuum on the charging base, the
charging status. The number on the display screen represents the current battery
level in a percentage during charging. When the number is at 100, the battery is fully
charged. Once the vacuum is fully charged, the indicator will turn off after 10 seconds.
Note: No operation for 15 minutes after being fully charged, the vacuum begins
sleeping.
on the screen lights up to indicate the
EN
9
Publicité
Table des Matières
