VESTEL IF65LC28-A Manuel D'utilisation page 37

GETWB Get white balance value.
Set 3D mode values
(values are off, auto, side
SET3DMODE
by side, top bottom and
game)
SETVIRTUAL3D
Set virtual 3d values.
Inrease Contrast Level
CONTRASTUP
by 1 step
Decrease Contrast Level
CONTRASTDOWN
by 1 step
Get energy saving mode.
GETENERGYSAVING
(if enabled from profile)
GETPOWERSAVE
Get power save mode
GETCOLOURTEMP Get colour temperature.
GETHUE Get picture hue value.
Get picture skin tone
GETSKINTONE
value.
Get selected pattern of
GETPATTERN
the Monitor screen
Command
SETROWCOUNT Set row count.
GETROWCOUNT Get row count.
SETCOLUMNCOUNT
Set column count.
GETCOLUMNCOUNT Get column count.
SETCELL Set cell.
GETCELL Get cell.
SETOFFSET Set offset.
GETOFFSET Get offset.
SETVIDEOWALL Set videowall parameters
GETVIDEOWALL Get videowall parameters no parameter
All manuals and user guides at all-guides.com
str-int type (type = redgain,
greengain, bluegain,
redoffset, greenoffset,
blueoffset)
int n (n = off, auto, side by
side, top bottom, game)
int n (0 = off, 1 = low, 2 =
medium, 3 = high)
no parameter
no parameter
no parameter
no parameter
no parameter
no parameter
no parameter
no parameter
VIDEO WALL COMMANDS
Description
integer n (0 ≤ n ≤ 100)
no parameter
integer n (0 ≤ n ≤ 100)
no parameter
integer n (0 ≤ n ≤ 100)
no parameter
integer n (0 ≤ n ≤ 100). n is
the number of pixels which
will be cropped from all four
sides.
no parameter
"parameters for items in
following format:
RowCount-ColumnCount-
Cell-Offset"
English - 36 -
#* type ...
"#*set3DMode() set to n
#*Incorrect 3d mode parameter
entered"
"seMonitorirtual3D() set to n
Incorrect virtual 3d mode
paramater entered
"
Picture contrast value is set to ...
Picture contrast value is set to ...
#*The energy saving mode is ...
"#*Powersavemode is ON
#*Powersavemode is OFF"
#*Colour temp is ...
#*Hue level is ...
#*Picture skin tone is ...
The pattern is ...
Parameter
#*set row count to n
#*row count is ...
#*set column count to n
#*column count is ...
#*set cell to n
#*cell is ...
#*set offset to n
#*offset is ...
#*set row count to ..., set column
count to ..., set cell to ..., set offset
to ...
#*row count is ..., column count is
..., cell is ..., offset is ...
Return