VESTEL IF65LC28-A Manuel D'utilisation page 23

OPS Settings
Scheduler Settings
Link options
All manuals and user guides at all-guides.com
Press OK to open the OPS Settings menu screen. Three sub-menu options are
available.
OPS Information: Displays read-only information about the OPS unit, if supported.
OPS Status: Displays whether the OPS module is on or off. Allows the change of
status via soft PSON signal (0.5s)
Boot Signal: Enables or disables sending of a PSON signal. The Display checks the
status signal of the OPS at bootup in order to turn it on by sending a PSON signal if
it is off. Some OPS's send incorrect information on their status during the bootup of
the Display, so they seem to be on even though they are off. For such non-standard
OPS's, this option must be enabled. In this case, a PSON signal will be send for the
OPS regardless of the received status information at bootup.
Powerdown: Turns the OPS off via hard PSON signal (5s)
Note: This menu will not be available if OPS is not supported or not connected to the unit.
Using the scheduler options you can set the unit to turn on automatically at defined time
intervals with the defined input source setting on the desired days of the week. Press OK
to open the Scheduler Settings menu screen. You can set up to 4 different schedulers.
Highlight the first checkbox of to the desired scheduler option and check it by pressing
the OK button. Now you will be able to define a time for the Display to be turned on
automatically. Highlight the time box next to the first checkbox and press the OK button,
then use the directional and numeric buttons on the remote to set a time. Press the OK
button again when you are done.
Perform the same steps to set a time for the Display to turn off.
You can also define a source for your scheduler. Highlight the box located under the
Source tab for your scheduler option and press the OK button, then set as desired using
the Left/Right directional buttons. If the Source option is set as Last Source, the input
source will not be changed at the power-up. If the Source option is set as USB, the
media files in the connected USB device will be played back automatically as explained
in the section entitled 'USB Auto Play Feature'.
Lastly, you can select the week day/s for your scheduler setting to be activated. Highlight
the checkbox under the desired day tab and press OK to check. Highlight and press
OK a second time to uncheck a box. The scheduler will be active on the checked days
of the week.
Press the Green button to save settings when complete.
Note: Only the USB devices connected to the Displays USB inputs which are not dedicated to the ANDROID
source.
Press OK to open the Link Options menu screen. Current Start url and Settings url
links will be displayed. These items are for information only and not selectable. Open
browser initial page and NTP server link preferences can be configured using the
related options.
English - 22 -