VESTEL IF65LC28-A Manuel D'utilisation page 36

SETOPSPOWER Set OPS power status
Command
COLOURTEMP Set colour temperature.
GETPICTUREMODE Get picture mode.
PICTUREMODE Select picture mode.
Get picture contrast
GETCONTRAST
value.
Set picture contrast
SETCONTRAST
value.
Get picture brightness
GETBRIGHTNESS
value.
Set picture brightness
SETBRIGHTNESS
value.
Get picture sharpness
GETSHARPNESS
value.
Set picture sharpness
SETSHARPNESS
value.
GETCOLOUR Get picture colour value.
SETCOLOUR
Set picture colour value.
Set picture skin tone
SETSKINTONE
value.
PICTUREZOOM Set picture zoom mode.
SETWB Set white balance value.
All manuals and user guides at all-guides.com
string parameter "on" or
"off"
PICTURE COMMANDS
Description
str-int n (n = normal, warm,
cool)
no parameter
int n (1 = dynamic, 2 =
natural, 3 = cinema, 4 =
game)
no parameter
int n (0 ≤ n ≤ 100)
no parameter
int n (0 ≤ n ≤ 100)
no parameter
int n (0 ≤ n ≤ 100)
no parameter
int n (0 ≤ n ≤ 100)
int n (-5 ≤ n ≤ 5)
str-int n (n = auto, 16:9,
subtitle, 14:9, 14:9zoom, 4:3,
full(only for HD channels),
panaromic, cinema)
str-int type, value (type =
redgain, greengain, bluegain,
redoffset, greenoffset,
blueoffset) (0 ≤ value ≤250)
English - 35 -
"#*Turning OPS on
#*Turning OPS off
#*The OPS is already on
#*The OPS if already off
#*The OPS is not enabled
#*The OPS is not plugged in
#*invalid value entered"
Parameter
#*setColourTemp() set to n
#*Picture Mode is ... for current
source
"#*setPictureMode() set to n
#*Incorrect picture mode
paramater entered"
#*THE CONTRAST VALUE : ...
"#*Picture contrast value is set to n
#*Same value is set. Do nothing.
#*Incorrect value must between
defined ranges 0-100"
#*THE BRIGHTNESS VALUE : ...
"#*Picture brightness value is set
to n
#*Same value is set. Do nothing.
#*Incorrect value must between
defined ranges 0-100"
#*THE SHARPNESS VALUE : ...
"#*Picture brightness value is set
to n
#*Same value is set. Do nothing.
#*Incorrect value must between
defined ranges 0-100"
#*THE COLOUR VALUE : ...
"#*Picture colour value is set to n
#*Same value is set. Do nothing.
#*Incorrect value must between
defined ranges 0-100"
"#*Picture skin tone value is set
to n
#*Same value is set. Do nothing.
#*Incorrect value must between
defined ranges -5-5"
"#*setPictureZoomMode() set to n
#*Incorrect picture zoom mode
parameter entered"
"#*White Balance is set to value
Invalid value for White Balance
(0-255)
Invalid type for White Balance"
Return