Osd Rotation Support; Real Time Clock (Rtc) - VESTEL IF65LC28-A Manuel D'utilisation

and the browser bar which contains previous/next
buttons, the refresh button, the address/search bar,
the Speed Dial and the Opera buttons are available.
To add a desired website to the Speed Dial list for
quick access, move the cursor to the top of the page.
The browser bar will appear. Highlight the Speed Dial
button and press the OK button. Then select Add
-
to Speed Dial option and press the OK button. Fill in
the blanks for Name and Address, highlight OK and
press the OK button to add. Whilst you are on the
site you wish to add to the Speed Dial list, highlight
the Opera- button and press the OK button. Then
highlight Add to Speed Dial option in the submenu
and press the OK button again. Name and Address
will be filled automatically according to the site you are
visiting. Highlight OK and press the OK button to add.
You can also use the Opera menu options to manage
the browser. Highlight the Opera-
the OK button to see available page specific and
general options.
There are various ways to search or visit websites
using the web browser.
Enter the address of a website(URL) into the search/
address bar and highlight the Submit button on the
virtual keyboard and press the OK button to visit the
site.
Enter keyword/s into the search/address bar and
highlight the Submit button on the virtual keyboard
and press the OK button to start a search for the
related websites.
Highlight a Speed Dial thumbnail and press the OK
button to visit the related website.
Your Display is compatible with USB keyboards/mice.
Plug your device into the USB input of your Display
for easier and quicker navigation.
Some web pages include flash content. These are not
supported by the browser.
Your Display does not support any download
processes from the internet via the browser.
All sites on the internet might not be supported.
According to the site; content problems may occur.
In some circumstances video contents might not be
able to be played.

OSD Rotation Support

You can change the
OSD (On Screen Display)
of your Display if desired. While performing First
time installation set the OSD Orientation option
as desired when the Signage Settings menu is dis-
played. You can also change this setting later from the
Signage Settings>Controls menu. Available options
are:
Landscape, Portrait 1 and Portrait 2
All manuals and user guides at all-guides.com
DisplayPort
DisplayPort version 1.2 is supported via the Display-
Port input and output connectors on your Display.
DP Stream Setting option in the System>Set-
tings>More menu is set as MST(Multi-Stream Trans-
port) by default. If a MST compliant source device is
connected to the Display, the streaming data should
be configured on the source device (Daisy-chaining).
If DisplayPort version 1.1 compliant or SST (Single-
Stream Transport) compliant source device with
DisplayPort version 1.2 support is connected to the
Display, DisplayPort output on the Display will work as
a splitter. In this case, same image will be displayed
in all connected Displays.
To be able to stream the same image to all connected
Displays using a MST compliant device, DP Stream
button and press
Setting option in the System>Settings>More menu
should be set as SST.
The maximum amount of the Displays that can be
connected by using daisy-chaining function may differ
depending on the source device's capacity. The image
that will be displayed in all Displays will be defined by
the source device. For example, to be able to stream
4 different FHD images, the source device should be
capable of supporting this operation.
Note: It is recommended to use a DisplayPort certified cable
for connection.
In SST operation mode the total amount of the Displays is
limited (a maximum of 7 units) due to HDCP encryption. If
the signal is stable and there is no cable loss, there will be no
limitation in case the source content is not HDCP-encrypted.
When using cascade-connected Displays, it is recommended
to set the DP Stream Setting as SST on all Displays in SST
operation mode.
For proper operation in MST operation mode make sure your
source device is MST compliant. If your source device is a
computer check the specifications of its graphic card to ensure
MST compatibility. When using daisy-chained Displays, it is
recommended to set the DP Stream Setting as MST on all
Displays in MST operation mode.

Real Time Clock (RTC)

Your Display has an RTC. It is used to maintain the
real date and time information for a period of time if
the energy supply is interrupted by separating the
Display from the mains or by a power blackout. In this
case the Display will use the date and time information
rotation
stored in RTC.
• All time sources are able to override RTC date/time.
• Display tries to connect to the NTP server period-
.
English - 26 -
ically (6 hours after last update) to get the current
date and time information. If the Display successfully
gets these informations from the NTP server, it
updates itself and RTC with the received date and
time information. If the NTP server update fails, the
Display uses RTC time and date to update itself.