Axis 1650 Manuel D'instructions page 4

Page 4
Connect AXIS 1650
1. Make sure the Canon device is off and unplugged and that the AXIS 1650 external
power supply is disconnected.
2. Locate the serial number, found on the underside label of the AXIS 1650, and write it
down. You will need this number to configure the AXIS 1650.
Product Name
Serial Number/MAC Address
Print Server Name
3. Connect the AXIS 1650 to the Canon device. Please refer to the correct connection procedure below for
your Canon device.
Note: For Canon devices supporting both parallel and USB connections, select one of the
connection procedures below to connect the AXIS 1650.
For CANON Devices with USB Port
Connect the AXIS 1650 to the USB port using the USB cable.
AXIS 1650 Set-up Instructions