Important Safety Instructions; Before Irst Use - Stadler Form Mixer Two Mode D'emploi

English
MIXER TWO. STAND MIXER
Congratulations on the purchase of Premium class Mixer Two. The use
of this mixer will easily cope with a variety of culinary tasks processing
products. Convenience and simplicity of operation will give you doubtless
pleasure.
For additional information visit: www.stadlerform.ru

IMPORTANT SAFETY INSTRUCTIONS

Read carefully and save all the instructions provided with an appliance.
Never eject beaters or dough hooks when the appliance is in operation.
Ensure ingers are kept well away from moving beaters and dough hooks.
Do not operate for more than 3 minutes at a time when mixing heavy
loads. None of the recipes in this manual are considered a heavy load.
We are very safety conscious when designing and manufacturing consu-
mer products, but it is essential that the product user also exercise care
when using an electrical appliance.
Listed below are precautions which are essential for the safe use of an
electrical appliance:
Read carefully and save all the instructions provided with an appliance.
Always turn the power off at the power outlet before you insert or remove
a plug. Remove by grasping the plug - do not pull on the cord.
Turn the power off and remove the plug when the appliance is not in use
and before cleaning.
Do not use your appliance with an extension cord unless this cord has
been checked and tested by a qualiied technician or service person.
Always use your appliance from a power outlet of the voltage (A.C. only)
marked on the appliance.
Close supervision is necessary when your appliance is being used near
children or inirm persons.
Never leave an appliance unattended while in use.
Young children should be supervised to ensure that they do not play with
the appliance.
Do not use this appliance for any purpose other than its intended use.
Do not place this appliance on or near a hot gas lame, electrical element,
or on a heated oven. Do not place on top of any other appliance.
Do not let the power cord hang over the edge of a table or bench or touch
any hot surface.
Do not operate this appliance with a damaged power cord.
Do not immerse this appliance in any liquid.
MIXER DESCRIPTION
1. 12 speeds with LCD display
For precise speed control.
2. Power On switch
3. Feedback motor control system
Motor power is automatically increased under heavy load to maintain
speed at low RPM. Also allows a low speed for folding in dry ingredients.
4. Attachments removal button
Press to remove attachments
5. Twin motor 3-way beating action
The Patented system uses a second motor in the stand to drive the bowl
when the mixer is attached to the stand. This produces a much more
powerful mixer than conventional hand/stand mixers.
6. Offset spring loaded scraper beaters
Scrape the bottom of the bowl and allow access for adding ingredients
while the mixer is operating.
7. Large 3.6 litre Stainless steel bowl
A full sized bowl for those big mixing tasks.
8. Non-slip feet
9. Turbo Boost Function
To quickly combine ingredients.
10. Head tilt lock
Allows the head to be tilted out of the bowl.
11. Hand mixer release button
Press to remove handmixer when head is tilted out of the bowl.
12. Independant stand speed control
Bowl speed can be changed independant of mixer speed.
OPERATION

Before irst use

Before assembling your mixer be sure the power cord is unplugged from the
power outlet and power switch is in the 'OFF' position.
1. Press the 'tilt' button, located at the back of the unit. While the button
is depressed, hold the handle and ease the head of the mixer back. The
Mixmaster head will lock into this tilt position.
2. Select the desired attachments, depending on the mixing task to be per-
formed: beaters for whisking, mixing and beating, or dough hooks for
kneading.
3. Place the beaters into their correct openings. Ensure both beaters or
dough hooks are fully inserted into the correct sockets or your mixing
results may be affected.
NOTE
The two beaters and dough hooks are different shapes and only it into
their correct openings.
4. Place mixing bowl onto the turntable and lock into place by rotating
clockwise.
5. To lower the head of the Mixer and beaters/dough hooks into the bowl,
depress the 'tilt' button, hold the handle with the other hand and ease
the head of the mixer down. A 'click' will indicate when the head has
reached the correct position.