Honeywell Home TH9320WF Guide D'installation page 8

Connecting to the Wi-Fi network
After the initial setup, walk the homeowner
through connecting to a Wi-Fi network. Or,
refer the homeowner to the User's Guide, so
the homeowner can connect the thermostat
to a Wi-Fi network at a later time.
1 Connect the Wi-Fi network.
Yes
Touch to connect the thermostat to
the Wi-Fi network. The screen displays the
message "Searching for wireless networks.
Please wait..." after which it displays a list
of all Wi-Fi networks it can find.
Note: If you cannot complete this step now,
touch . The thermostat will display
I'll do it later
the home screen. Complete this process by
selecting MENU >
Step 2.
2 Select the network.
2a Touch the name of the homeowner's
network. The thermostat displays a
password page.
Note: If the home network is not shown on
the list, touch Rescan
2b Using the keyboard, touch the
characters that spell out the home
network password.
2c Touch Done. The thermostat displays
"Connecting to your network. Please
wait..." then shows a "Connection
Successful" screen.
2d Touch Next
information screen.
2e Have the homeowner register the
thermostat by going to
http://www.mytotalconnectcomfort.
com
Note the Thermostat MAC and CRC;
they'll be needed during registration.
Or, refer the homeowner to the User's
Guide.
Note: The Register Online screen remains
active until you complete registration and/or
touch Done.
3 For remote access, the homeowner or
end-user must register at
mytotalconnectcomfort.com
69-2815EFS—07
Wi-Fi Setup . Continue with
.
to display the registration
Your Network
Register
online for
remote
access
Press for info
8
Yes
Done
Next
Done