Honeywell Home PRO 2000 Serie Mode D'emploi

PRO 2000 Series
PROGRAMMABLE THERMOSTATS
TH2110DV1008, TH2210DV1006
THIS MANUAL COVERS THE
FOLLOWING MODELS:
TH2110D: For 1-Heat / 1-Cool systems
TH2210D: For 2-Heat / 1-Cool heat pump systems
(Remove the thermostat from its wallplate to find the
model number.)
CAUTION
EQUIPMENT DAMAGE HAZARD.
To prevent possible compressor damage, do not
use Cooling mode when the outdoor temperature is
below 50 °F (10 °C).
NEED HELP?
For assistance with this product please visit
www.resideo.com
or call Resideo Customer Care toll-free at
1-800-468-1502.
READ AND SAVE THESE
INSTRUCTIONS.
® U.S. Registered Trademark. Patents pending.
© 2020 Resideo Technologies, Inc. All rights reserved.
OPERATING MANUAL
ABOUT YOUR NEW
THERMOSTAT
Your new Resideo thermostat has been designed to give
you many years of reliable service and easy-to-use, push-
button climate control.
Features
• Backlit display is easy to read
• Displays ambient (measured) temperature at all times
• One-touch access to setpoint temperature
• Preprogrammed schedule can greatly reduce your
heating/cooling expenses
• Separate programmable weekday/weekend schedules
(5+2 day programming)
• Temporary and permanent override of schedule
• Adaptive Intelligent Recovery™ ensures right
temperature at the right time
• Built-in compressor protection
THIS THERMOSTAT IS READY
TO GO
Simply perform the three steps below and the thermostat
is in operation:
1. Set the clock. See page 2.
2. Select whether to heat or cool. See page 2.
3. Select whether to run the fan continuously or only
when needed. See page 3.
If you do not wish to use the pre-programmed schedule
settings, you can:
• Modify the schedule. See page 3.
• Temporarily override the schedule. See page 4.
• Permanently override the schedule. See page 4.
69-1969EFS-09