Technical Data; Intended Use; Safety Information; Storage, Cleaning - Zoofari KB-6453 Notice De Montage

Congratulations!
Congratulations on purchasing this high-quality
product. Be sure to familiarise yourself with the
assembly instructions prior to use.
P lease take the time to carefully
read through the following assem-
bly instructions and safety notes.
Only use the product as described and for the
intended use. Please retain these assembly
instructions for future reference and ensure that
they are passed on to any third party.
Package contents/parts list
(Fig. A)
1 x floor (1)
1 x round panel (2)
1 x cat den (3)
1 x basket with ball (4)
1 x scratching post (5)
1 x hammock (6)
1 x rope (7)
2 x sisal column, 37cm, without thread (8)
1 x sisal column, 35cm, with thread (9)
1 x sisal column, 15cm, with thread (10)
1 x column, 27cm, with thread (11)
3 x screw, long (12)
1 x screw, short (13)
2 x screw thread (14)
1 x Allen key (15)
1 x assembly instructions

Technical data

Total dimensions: approx. 70 x 115 x 50cm
(W x H x D)
Max. capacity: 6kg
D ate of manufacture (month/year):
04/2019

Intended use

The item is not intended for commercial use. The
item serves as an indoor scratching post for cats.
All manuals and user guides at all-guides.com

Safety information

Important: read these assembly instruc-
tions carefully and keep them in a safe
place!
Life-threatening hazard!
• Never leave children unattended with the
packaging materials. There is a risk of suffoca-
tion.
• This item is neither a toy, nor a climbing appa-
ratus! Ensure that persons, especially children,
do not pull themselves up on the item or lean
against it. The item can topple over.
Risk of injury!
• Make sure the item is properly stabilised
before using it!
• Place the item on a level and solid surface. Do
not place it near stairs.
• Do not place hazardous items like candles on
or near the item.
• Check the item regularly for wear. Check
regularly to make sure all bolted connections
are tight! Only use the item if it is in perfect
condition.
• The item may only be used for its intended
purpose.
• Do not exceed the maximum load capacity.
Assembly (Fig. B)
1. Remove the packaging and lay out all the
parts of the item on the floor.
2. Assemble the item as indicated in Fig. B.
Note: to reduce the risk of the item tip-
ping over, the item can be placed with
its back against a wall.

Storage, cleaning

Always store the product in clean and dry
condition at room temperature. Only vacuum
the item.
IMPORTANT! Never clean the product with
aggressive cleaning agents.
GB/IE 7