Installation Diagram - Mitsubishi Electric MXZ-3B24NA Manuel D'installation

1-6. INSTALLATION DIAGRAM

MXZ-3B30NA
More than 100 mm
Open as a rule
both sides and top are open
Air inlet
1-7. MOUNTING ARRANGEMENT OF DRAIN SOCKET
Note:
The outdoor unit produces condensate during the heating operation. Select the installation place to ensure to prevent the outdoor unitand/ or the grounds
4
Open as a rule
More than 500 mm
and both sides are open
Outdoor unit installation
2-U-shape notched holes
200
Air inlet
Air outlet
PARTS TO BE PROVIDED AT YOUR SITE
-
no gap.
When the piping is to be at-
tached to a wall containing metals
between the wall and the piping
or wrap 7 to 8 turns of insulation
To use existing piping, perform
COOL operation for 30 minutes
and pump down before removing
the old air conditioner. Remake
for new refrigerant.
More than
More than
* Note:
obstacles to both sides
from the TV antenna wire.
Indoor/outdoor unit connecting wire*
Wall hole cover
Piping tape
Extension drain hose
(or soft PVC hose, 15 mm (19/32
Refrigeration oil
Wall hole sleeve
inner diameter or hard PVC pipe
VP25 for drain socket
1
1
1
1
1
1
Little
amount
1
2 to 7
2 to 7
1
1
-