Laney LIONHEART L20H Mode D'emploi page 8

L20H FEATURES
19- FX-LOOP:
FX RETURN: Mono jack socket for the connection of the output of an external FX unit. This
can also be used as a slave in for the power amp. As the FX loop is an insert type, this will
mute the preamp.
FXLOOP SWITCH: Selects the FX loop mode of operation
• 10 dBu - For connection of FX units with a -10dBu nominal output level. As this
is intended for devices wth a lower output level, this switch increases the gain
from the FX loop by 10dBu.
• 0 dBu - For connection of FX units with a 0 dbu nominal output level.
• Bypass - Removes the FX loop from the signal path.
FX SEND: Mono jack socket for connection to the input of an external FX unit.
FOOTSWITCH SOCKET: Provided for connection of the included Laney FS2-MINI
20 -
footswitch. This allows you to remotely switch between the clean/drive channel and switch
the built in reverb On/Off.
8
L20H USER MANUAL - EN
19
www.laney.co.uk
20