Testboy TV 341 Manuel D'utilisation page 13

Selecting material
By pressing ▲, select the material to be measured.
The following symbols appear on the display:
If the material is not recognized, select Material 1.
Material 1 8.8 to 54.8 %
Material 2 7.0 to 47.9 %
Material 3 0.9 to 22.1 %
Material 4 0.0 to 11.0 %
Material 5 0.7 to 8.6 %
Material 6 0.6 to 9.9 %
Material 7 0.1 to 16.5 %
In order to ensure an exact measurement, the measurement must be repeated at
different positions. Insert the measurement probes into the material. Keep the hands
and other sources of interference away from the measurement probes.
Indication of the highest and lowest value
"Mode"
By pressing , the actual value (HOLD), highest value (MAX) and lowest value (MIN) are
indicated consecutively.
The highest and lowest value apply from switching on or resetting the measurement instrument.
Testboy TV 341
®
(Wood),
Beech, spruce, larch, birch, cherry, walnut
Oak, cedar, maple, ash, Douglas fir, meranti
Cement, concrete area, gypsum product
Anhydrite screed
Cement mortar
Lime mortar
Tile
Operation
(Construction material).
13