The Product Rating Plate. Refer To Page 4 For Rating Plate; Location. For Warranty Purposes, You Will Also Need The Date; Of Installation And Name Of Your Authorized Sub-Zero Dealer - Sub-Zero UC-24BG Mode D'emploi

TROUBLESHOOTING
Troubleshooting
ICE PRODUCTION (MODEL UC-24CI)
No ice.
• Verify ice maker has been on for at least 24 hours.
• Verify freezer temperature near 0°F.
• Verify ice container is properly installed.
• Verify ice maker arm in down position.
• Verify water is being supplied to unit.
Blue or green ice.
• Possible copper supply line corrosion. Contact plumber
to clean or replace.
Black flecks in cubes.
• Stop use and contact Sub-Zero factory certified service.
Bad taste.
• Defrost freezer and clean with soap and water.
• Place coffee grounds or charcoal briquettes in freezer to
absorb odor.
Hollow cubes.
• Clean condenser. Contact Sub-Zero factory certified
service if unresolved.
Sub-Zero, Sub-Zero & Design, Dual Refrigeration, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, and Ingredients are registered trademarks and service
marks of Sub-Zero, Inc. Wolf, Wolf & Design, Wolf Gourmet, W & Design and the color red as applied to knobs are registered trademarks and service marks of Wolf Appliance, Inc.
All other trademarks or registered trademarks are property of their respective owners in the United States and other countries.
SERVICE
• Maintain the quality built into your product by contacting
Sub-Zero factory certified service. For the name of the
nearest Sub-Zero factory certified service, check the
contact & support section of our website, subzero.com
or call Sub-Zero customer care at 800-222-7820.
• When contacting service, you will need the model and
serial number of your unit. Both numbers are listed on

the product rating plate. Refer to page 4 for rating plate

location.
• For warranty purposes, you will also need the date
of installation and name of your authorized Sub-Zero
dealer. This information should be recorded on page 2.
|
subzero.com 9