ARTHUR MARTIN AMP121 Manuel D'instruction page 25

7) Scratch along the locating slot of roll brush with blade to cut and clean the
air. After it, install the floor brush well again and close the roll brush cover.
To slide a blade of scissor along the groove of the Brush Bar to cut the hairs
twisted around. After cleaning, insert the Brush Bar into the Floor Brush and
slide the End Cap clockwise to fasten it.
NOTE: It is recommended to clean the duct cup after every use. If the HEPA
filter is blocked caused by the accumulation of dust, please clean or replace it
in time. The electric roll brush may be wrapped with some hair or other floccule
after long time use, so please clean it in time to make the appliance work
efficiently.
7. ELECTRICAL PARAMETER
Product model
Working voltage
Rated power
Adaptor model
Adaptor input
Adaptor output
Electric floor brush rated power 10W
All manuals and user guides at all-guides.com
Fig. 6-7a
AMP121
DC 18V
100W
JOD-S-220050GS/BLJ15L220050P-V
100-240V 50/60Hz
22V 500mA
２４
Fig. 6-7b