ARTHUR MARTIN AMP121 Manuel D'instruction page 24

All manuals and user guides at all-guides.com
4) Clean HEPA filter (5) with water when the appliance works inefficiently, dry it
completely after cleaning.
NOTE: HEPA filter and other spare parts can be purchased from the vacuum
cleaner retailers.
5) After cleaning the dust cup assembly, please install the HEPA filter into the
filter cover firstly and then put them into the dust cup, after it, install the dust
cup into the sub-unit.
Fig. 6-4
6) If hair found on the floor brush, press the roll brush release tab (7) as shown
below to open the roll brush cover, and then remove the roll brush (8).
When some hair twists around the brush bar, please slide the End Cap (10)
of the brush bar counterclockwise and pull the brush bar out of the Floor Brush.
7
8
Fig. 6-5a Fig. 6-5b
9
10
Fig. 6-6a Fig. 6-6b
２３