Charging - Rocky Mountain Overtimepack Guide De L'utilisateur

Overtimepack - Owner's manual
TM

Charging

NOTE: Charge every three months to avoid damage. For more information, visit
bikes.com/overtimepack.
Only use the dedicated Rocky Mountain® charger for your Overtimepack™.
Before using the Overtimepack™ for the first time, charge it to 100%.
To charge the Overtimepack™
1. Find the charging port on the Overtimepack™ and open it.
2. Connect the charger to the Overtimepack™.
3. Plug the charger into an electrical source. The green LED will illuminate.
4. Once charging is complete, the LED will turn green. It is not mandatory to disconnect
the charger as soon as charging is complete; however, you should not leave the
charger plugged in for a period longer than 12 hours.
The chargers have been designed to function in 240V or 120V depending on your
location.
9