Dyson supersonic HD01 Guide D'utilisation page 6

All manuals and user guides at all-guides.com
7. This appliance has a non- self
resetting thermal cut out safety
device to prevent overheating.
If your appliance cuts out, unplug
it from the mains supply socket
and leave to cool.
8. CAUTION: In order to avoid
a hazard due to inadvertent
resetting of the thermal cut-
out, this appliance must not be
supplied through an external
switching device, such as a timer,
or connected to a circuit that
is regularly switched on and
off by the utility company, or
plugged into any socket where
the electrical supply is unstable or
likely to be turned off.
9. For additional protection, the
installation of a residual current
device (RCD) having a rated
residual operating current not
exceeding 30 mA is advisable
in the electrical circuit supplying
the bathroom. Ask your installer
for advice.
10. Do not use the appliance for any
other purpose than drying hair.
11. Do not handle any part of the
plug or appliance with wet hands.
12. Do not unplug by pulling
on the cord. To unplug,
6