Multi-Stage Cooking And Myrecipe; Warm Keeping - Philips HD3198 Mode D'emploi

6
When the cooking is finished, the appliance
beeps and turns into warm keeping
automatically.
Note
• If you select a temperature below 80°C, the
multicooker automatically turns into standby
after the cooking process is finished.
• If you select a temperature above 140°C, the
top lid must be open during cooking.
Multi-stage cooking and
MyRecipe
With the multi-stage cooking function, you can
set up to 9 stages of cooking processes with
different time and temperature.
For example, you can set the first stage for
5 minutes at 160°C, the second stage for
10 minutes at 100°C and the last stage for 20
minutes at 80°C.
1
When the multicooker is at standby mode,
press the multi-stage button (Manuel).
(fig. })
» "1" displays on the screen.
2
Refer to chapter "Setting up the cooking
time" and select the cooking time for
stage 1.
3
Press the temperature button (Temp) once
or repeatedly to select the temperature
you need for stage 1. (fig. ~)
4
Press the multi-stage button (Manuel Pro)
again and move to stage 2. (fig. )
» "2" displays on the screen.
5
Set the cooking time and temperature for
stage 2.
6
Repeat the above steps until you have set
all the stages you need, and then press the
start button (On/Off) to confirm and start
cooking (fig. i).
7
When the cooking is finished, if you would
like to save the cooking stages you have
All manuals and user guides at all-guides.com

Warm keeping

The multicooker provides you with easy control
over the keep-warm mode.
•
•
set, within 10 minutes after the cooking
is finished, press and hold the MyRecipe
button (MyRecipe) for 3 seconds. (fig. €)
» "F1" displays on the screen.
Note
• You can save up to 5 multi-stage cooking menus
in MyRecipe, and they are saved as F1, F2, F3,
F4 an F5.
• When the multicooker is at standby mode, press
and hold the MyRecipe button (MyRecipe) for
3 seconds, and then press the increase (+) or
decrease (-) button to choose the menu you
need.
• If you would like to replace one of the current
multi-stage cooking menus with a new setting,
select the menu you no longer need, and save
the new setting to it.
After you have selected the cooking
function using the menu button (Menu), if
you press the start button (On/Off) directly,
the keep-warm indicator will light up. After
the cooking is finished, the multicooker will
switch to keep-warm mode directly.
After you have selected the cooking
function using the menu button (Menu), if
you press the keep-warm button (Chaud)
first, and then the start button (On/Off),
the keep-warm indicator will be off. After
the cooking is finished, the multicooker will
be in standby mode.
EN
15