Compliance With Standards - Visonic TYCO KP-241 PG2 Guide De Démarrage Rapide

Compliance with standards

Europe: EN 300220, EN 300 330, EN 301489, EN 50130-4, EN 62368-1, EN 50130-5, EN 50131-3, EN 50131-1 Grade
2 Class II, EN 50131-6, Type C.
Hereby, Visonic Ltd. declares that the radio equipment type KP-241 PG2 is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
http://www.visonic.com/download-center.
Certified by Norwegian accredited certification body Applica Test & Certification AS in accordance with EN 50131-
3, EN 50131-6, EN 50131-5-3, EN 50130-4, and EN 50130-5.
UK: This product is suitable for use in systems installed to conform to PD6662 at Grade 2 and environmental
class 2. BS8243
USA: FCC- CFR 47 part 15.
Canada: IC RSS-247.
This device complies with FCC Rules Part 15 and with Industry Canada license-exempt RSS standard(s).
Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference that may be received or that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
To comply with FCC Section 1.1310 for human exposure to radio frequency electromagnetic fields and IC
requirements, implement the following instruction: A distance of at least 20cm. between the equipment and
all persons should be maintained during the operation of the equipment.
Le dispositif doit être placé à une distance d'au moins 20 cm à partir de toutes les personnes au cours de son
fonctionnement normal. Les antennes utilisées pour ce produit ne doivent pas être situés ou exploités
conjointement avec une autre antenne ou transmetteur.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy, and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
6
WARNING! Changes or modifications to this unit not expressly approved by the party responsible or
compliance could void the user's authority to operate the equipment.
W.E.E.E. Product Recycling Declaration
For information regarding the recycling of this product you must contact the company
from which you originally purchased it. If you are discarding this product and not
returning it for repair then you must ensure that it is returned as identified by your
supplier. This product is not to be thrown away with everyday waste.
Directive 2012/19/EU Waste Electrical and Electronic Equipment.
Warranty
Visonic Limited (the "Manufacturer") warrants this product only (the "Product") to the original purchaser only (the
"Purchaser") against defective workmanship and materials under normal use of the Product for a period of twelve (12)
months from the date of shipment by the Manufacturer.
This Warranty is absolutely conditional upon the Product having been properly installed, maintained and operated
under conditions of normal use in accordance with the Manufacturers recommended installation and operation
instructions. Products which have become defective for any other reason, according to the Manufacturers discretion,
such as improper installation, failure to follow recommended installation and operational instructions, neglect, willful
damage, misuse or vandalism, accidental damage, alteration or tampering, or repair by anyone other than the
manufacturer, are not covered by this Warranty.
There is absolutely no warranty on software, and all software products are sold as a user license under the terms of
the software license agreement included with such Product."
The Manufacturer does not represent that this Product may not be compromised and/or circumvented or that the
Product will prevent any death and/or personal injury and/or damage to property resulting from burglary, robbery, fire
or otherwise, or that the Product will in all cases provide adequate warning or protection.
installed and maintained, only reduces the risk of such events without warning and it is not a guarantee or insurance
that such events will not occur.
Conditions to Void Warranty
This warranty applies only to defects in parts and workmanship relating to normal use of the Products. It does not
cover:
 damage incurred in shipping or handling;
 damage caused by disaster such as fire, flood, wind, earthquake or lightning;
 damage due to causes beyond the control of the Seller such as excessive voltage, mechanical shock or water
damage;
 damage caused by unauthorized attachment, alterations, modifications or foreign objects being used with or in
conjunction with the Products;
 damage caused by peripherals (unless such peripherals were supplied by the Seller;
 defects caused by failure to provide a suitable installation environment for the products;
 damage caused by use of the Products for purposes other than those for which they were designed;
 damage from improper maintenance;
 damage arising out of any other abuse, mishandling or improper application of the Products.
KP-241 PowerG wireless portable keypad
The Product, properly
D-307871 KP-241 PG2 Quick Start Guide