Publicité
Les langues disponibles
Les langues disponibles
BPT18-34A-1 & BPT18-54A-1
BATHROOM EXHAUST FANS
INSTALLATION INSTRUCTIONS
DUCT CONNECTION (FIGURE 5)
5.
a) Install a circular duct to the outlet and secure it With duct tape or
clamps to the outlet.
b) Install the duct with a gradient of 1˚ ~ 2˚ to the outside.
USING QUICK CONNECT (FIGURE 6)
6.
WARNING: Wiring must comply with all applicable electrical codes.
Turn power OFF before removing or installing connectors.
WARNING: COPPER to COPPER ONLY. Do not use on Aluminum
wire.
CAUTION: The Quick Connect accessory part should be installed
as per instructions below.
NOTE: Connector is reusable on solid wires of the same wire
gage or smaller. Do not reuse connector on stranded wires.
a) Strip the wires so half of the bare wire is showing.
b) Grip the wire firmly and push the stripped end of the wire into the
open port of connector). Use only one stripped end of the wire per
port.
c) Verify the stripped end of the wire is fully inserted to the back of the
connector.
NOTE: Important wire information. Maximum temperature rating 105°C (221°F).
600 volts maximum for building wire and 1000 volts maximum in signs and
lighting fixtures. Flammability rating of the wires must meet UL94-V2. The
acceptable wire range includes: Solid: 12-20 AWG, Stranded: 12-16 AWG (≤19
STRAND); 18AWG (7 STRAND), Tin bonded: 14-18 AWG (≤19 STRAND).
CONNECTING WIRING FROM UNIT TO HOUSE
7.
(FIGURE 7)
WARNING: Make sure that the main power is off.
WARNING: COPPER to COPPER ONLY.
Do not use on Aluminum wire.
CAUTION: The Quick Connect accessory part should be installed
as per instructions below.
a) Connect house wires to ventilation fan wires.
b) Match colors as shown (black to black, white to white, and green
to green) using quick connects or wire nuts (not provided).
c) Replace the junction box cover. Do not pinch the lead wires.
MOUNTING THE GRILL (FIGURE 8)
8.
a) Use the spring clips to pinch mount and insert the grill into the
narrow rectangular slots inside of the fan housing next to the fan
motor.
BPT18-34A-1-M & BPT18-54A-1-M-04_15_20
CONTINUED...
AUTOMATIC TERMINAL
CAPACITOR
PRODUCT WIRES
CIRCULAR
DUCT
QUICK
CONNECT
PRODUCT
WIRES
HOUSE WIRES
JUNCTION BOX
MOTOR
QUICK
CONNECT
HOUSE WIRES
FIGURE 5
FIGURE 6
FIGURE 7
(black) to switch
(white) to neutral
(green) to ground
FIGURE 8
GRILL
Page 3 of 4
Publicité
