Publicité
Les langues disponibles
Les langues disponibles
BPT18-34A-1 & BPT18-54A-1
BATHROOM EXHAUST FANS
DIMENSIONS
BPT18-34A-1
15.86"
8.75"
4" OUTLET
10.28"
INSTALLATION INSTRUCTIONS
WARNING: TURN OFF ELECTRICITY AT BREAKER BOX
BEFORE BEGINNING INSTALLATION
DETERMINING JOIST WIDTH
1.
Measure the distance from the center of the two ceiling joists where
you will be installing the ventilation fan (as shown in Figure 1).
SUSPENSION BRACKET INSTALLATION (FIGURE 2)
2.
a) For ceiling joist installations under 20", insert suspension
bracket 1 into the fan body, as shown in Figure 2 . Proceed to step 3.
b) For ceiling joist installations between 20" and 24", insert
suspension brackets 1, 2, and 3. Proceed to step 4.
NOTE: Sliding hanger are provided to allow for accurate
positioning of the main body between joists.
JOINT INSTALLATION UNDER 20" (FIGURE 3)
3.
a) Use four long wood screws to attach the main body of the
fan to the ceiling joists.
b) Ensure the main body is level and square to the joists.
c) Tighten all screws.
CAUTION: Do not mount the fan flush against the joist.
The flange should be flush with the ceiling board.
20" - 24" JOINT INSTALLATION
4.
(FIGURE 4)
a) Use long wood screws to loosely attach the main body of the fan
to one ceiling joist.
b) Extend the hanger bars to the opposite ceiling joist.
c) Secure the suspension brackets to the joist using long
wood screws.
d) Ensure the main body is level and square to the joists.
e) Tighten all screws.
CAUTION: Do not mount the fan flush against the joist.
The flange should be flush with the ceiling board.
BPT18-34A-1-M & BPT18-54A-1-M-04_15_20
15.86"
13.27"
13.27"
7.95"
8.31"
10.36"
BPT18-54A-1
1.2"
9.1"
10.3"
FAN BODY
SUSPENSION
BRACKET 2
LONG
WOOD
SCREWS
LONG
WOOD
SCREWS
12.5"
12.6"
15.5"
7.9"
6" OUTLET
10.4"
FIGURE 1
FIGURE 2
SUSPENSION
BRACKET 1
SUSPENSION
BRACKET 3
FIGURE 3
LONG
WOOD
SCREWS
FIGURE 4
Page 2 of 4
Publicité
