NEC MultiSync LCD Serie Mode D'emploi page 8

Quick Start cont.
Tilt
Grasp both sides of the monitor screen with your
hands and adjust the tilt as desired (Figure TS.1).
Remove Monitor Stand for Mounting
To prepare the monitor for alternate mounting
purposes:
1. Remove the back cover and the cable cover
(Figure R.1).
2. Disconnect all cables.
3. Place monitor face down on a non-
abrasive surface (Figure R.2).
4. Remove the 4 screws connecting
the monitor to the stand and lift off
the stand assembly (Figure R.2).
The monitor is now ready for
mounting in an alternate manner.
5. Connect the AC Adapter cord to
the back of the monitor marked
"DC in" (Figure R.3).
6. Reverse this process to reattach stand.
NOTE: Use only VESA-compatible alternative mounting method.
When the monitor stand is removed, the USB capabilities
will be disabled.
Please use only the supplied AC Adapter (#A1240T01).
CAUTION
Non-abrasive surface
78134672.wpc
Figure R.2
8
Figure R.1
6
7/16/99, 2:25 PM
Figure TS.1
Figure R.3