Fein GHB 15-50 Mode D'emploi page 10

en
10
Translation of the Original Instructions.
en
Symbols, abbreviations and terms used.
The symbols in the Instruction Manual and on the machine shall aide in directing your attention to possible haz-
ardous situations when working with this machine.
Symbol, character Explanation
Make sure to read the enclosed documents such as the Instruction Manual and the General
Safety Instructions.
Observe the instructions in the text or graphic opposite!
Observe the instructions in the text or graphic opposite!
General prohibition sign. This action is prohibited.
Before commencing this work step, pull the mains plug out of the socket. Otherwise there
will be danger of injury if the power tool should start unintentionally.
Do not touch the rotating parts of the power tool.
Use eye protection during operation.
Use ear protection during operation.
Use a dust mask during operation.
Use protective gloves during operation.
Confirms the conformity of the power tool with the directives of the European Community.
Confirms the conformity of the power tool with the directives of Great Britain (England,
Wales, Scotland).
Applies only for China:
The duration of environmental protection under normal use of the product is 10 years.
This sign indicates a possible dangerous situation that could cause severe or fatal injury.
WARNING
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environmental-friendly recycling.
Product with double or reinforced insulation
Switching on
Switching off
Locked
Not locked
Low sanding-belt speed
High sanding-belt speed
Rotation direction
(**) may contain numbers and letters
(Ax – Zx) Marking for internal purposes