General Information - BEDU POMPEN SD Serie Instructions Pour L'utilisation

THIS INSTRUCTION MANUAL IS THE PROPERTY
OF CALPEDA S.P.A. ANY REPRODUCTION, EVEN
IF PARTIAL, IS FORBIDDEN
SUMMARY
1. GENERAL INFORMATION .......................... 8
EN
2. TECHNICAL DESCRIPTION ....................... 9
3. TECHNICAL FEATURES ............................. 9
4. SAFETY ....................................................... 9
5. TRANSPORTATION AND HANDLING ....... 10
6. INSTALLATION .......................................... 10
7. STARTUP AND OPERATION .....................11
8. MAINTENANCE ......................................... 12
9. DISPOSAL ................................................. 12
10. SPARE PARTS ........................................... 12
11. DESIGNATION OF PARTS ........................ 12
12. TROUBLESHOOTING ............................... 13
Drawing for dismantling and assembly ............... 62
Declaration of conformity .................................... 79

1. GENERAL INFORMATION

Before using the product carefully read the
information contained in this instruction manual, the
manual should be kept for future reference.
Italian is the original language of this instruction
manual, this language is the reference language in
case of discrepancies in the translations.
This manual is part of the essential safety requirement
and must be retained until the product is finally de-
commissioned.
The customer, in case of loss, can request a copy
of the manual by contacting Calpeda S.p.A. or their
agent, specifying the type of product data shown on
the label of the machine (see 2.3 Marking)
Any changes, alterations or modifications made
to the product or part of it, not authorized by the
manufacturer, will revoke the "CE declaration" and
warranty.
This appliance should not be
operated by children younger
than 8 years, people with reduced
physical,
capacities,
people who are not familiar with
the product, unless they are given
close supervision or instructions on
how to use it safely and are made
aware by a responsible person of
the dangers its use might entail.
Children must not play with the
appliance.
It is the user's responsibility to
clean and maintain the appliance.
Children should never clean or
maintain it unless they are given
supervision.
Do not use in ponds, tanks or
swimming pools or where people
may enter or come into contact
Page 8 / 80
sensory or
or inexperienced
with the water.
Read carefully the installation
section which sets forth:
- The
structural
(chapter 3.1).
- The type and section of the
power cable (chapter 6.5).
- The type of electrical protection
to be installed (chapter 6.5).
1.1. Symbols
To improve the understanding of the manual, below
are indicated the symbols used with the related
meaning.
Information and warnings that must be
observed, otherwise there is a risk that the
machine could damage or compromise
personnel safety.
The failure to observe electrical information
and warnings, could damage the machine or
compromise personnel safety.
Notes
i
management of the machine and its parts.
Operations that could be performed by
the final user. After carefully reading of the
instructions, is responsible for maintenance
under normal conditions. They are authorized
to affect standard maintenance operations.
Operations that must be performed by a
qualified electrician. Specialized technician
authorised to affect all electrical operations
including maintenance. They are able to
operate with in the presence of high voltages.
Operations that must be done performed by
a qualified technician. Specialized technician
mental
able to install the device, under normal
conditions, working during "maintenance",
and allowed to do electrical and mechanical
interventions for maintenance. They must
be capable of executing simple electrical
and mechanical operations related to the
maintenance of the device.
Indicates that it is mandatory to use individual
protection devices.
Operations that must be done with the device
switched off and disconnected from the
OFF
power supply.
Operations that must be done with the device
switched on.
ON
1.2. Manufacturer name and address
Manufacturer name: Calpeda S.p.A.
Address: Via Roggia di Mezzo, 39
36050 Montorso Vicentino - Vicenza / Italia
www.calpeda.it
SD, SDX, SDS_Rev19 - Operating Instructions
maximum permissible
working pressure
and warnings for the correct