Rocktrail HG09090 Guide De Démarrage Rapide page 13

˜ Step 4 (Fig E)
Pull the pavilion roof
frame. Fix the roof into place using
the pre-installed velcro fasteners
on the roof frame.
˜ Step 5 (Fig F)
Insert the bottom corner poles
into the top corner poles and the
bases . Fasten the roof loops
[ 9 ]
into one of the drilled holes in the
bottom corner pole.
˜ Step 6 (Fig G)
Anchor each foot with the help of
the tent pegs
[ 10 ]
in the feet for this purpose. Knot
one end of each guy rope
roof loop at the outer corners
[ 3b ]
of the product.
mWarning! Extend the guy
ropes to their full length
in order to achieve a
high level of stability and
attach the ends using one
tent peg each.
mWarning! Make sure
the tent pegs are fixed
securely.
over the
3 ] [
3a ] [
6 ] [
3b ] [
. Use the openings
to a
11 ] [
˜ Disassembly
˜ Step 1
Loosen the tent pegs holding the
guy ropes and bases.
˜ Step 2
Release the roof loops from the
bottom corner poles. Remove the
bases and bottom corner poles.
˜ Step 3
Remove the roof and top corner
poles.
˜ Step 4
Disassemble the roof frame. Press
on the locking mechanism to
release the poles from the corner
connectors.
mWarning! Risk of trapping
hands or fingers!
˜ Step 5
Make sure that the article is clean
and dry prior to storage.
GB/IE 13