Rocktrail HG09090 Guide De Démarrage Rapide page 12

Individual pavilions must not
be connected or fixed to one
another. A minimum distance
of 3 metres must be maintained
between individual pavilions.
Any build-up's of water must be
removed!
The guy ropes must be used at
their full length.
˜ Choice of location
The dimensions of the article are
3 x 3 m, and additional space
will be required for the guy
ropes.
Wherever possible, place the
article in an area where it is
protected from the wind.
The ground should be level and
should provide the tent pegs
with sufficient stability.
˜ Assembly
Note!
At least 2 persons are needed to
erect the article. We recommend
that assembly should be carried
out by 4 persons.
12 GB/IE
˜ Step 1 (Fig B)
Assemble the roof frame. Connect
each of the centre poles
two corner connector poles
and a corner connector
Please make sure that the locking
mechanisms
1 ] [
both visibly and audibly in the
holes in the corner connector.
mWarning! Risk of trapping
hands or fingers!
˜ Step 2 (Fig C)
Insert the last four corner connector
poles into the corner connector.
Insert the four roof connector poles
and connect these to the roof
2 ] [
cross connector
sure that the locking mechanisms
click into place both visibly and
[ 1 ]
audibly in the holes in the corner
connector.
mWarning! Risk of trapping
hands or fingers!
˜ Step 3 (Fig D)
Insert the top corner poles
the corner connector
with
4 ] [
[ 1 ]
.
8 ] [
click into place
. Please make
7 ] [
into
[ 5 ]
.
[ 8 ]