Worx WG518 Mode D'emploi page 11

OPERATION
INTENDED USE:
The blower & Vac is intended for residential
use only. Use the blower outdoors to move or
vacuum yard debris as needed.
ASSEMBLY AND OPERATION
ACTION
Blow mode
Assembling the Blower Tube
Assembling the Concentrator
Nozzle(optional)
Attaching the Extension Cord See Fig. B1 & B2
Starting & Stopping
Using the Blower
Adjusting the Blowing Speed
Vacuum mode
Disassembling the Blower
Assembling the Vacuum Tube
Attaching the Leaf Collection
Bag
Attaching the Extension Cord See Fig. B1 & B2
Starting & Stopping
Using the Vacuum
Emptying the Leaf Collection
Bag
Removing Clogged Debris
from the Impeller (no tool
included)
12A 3 in 1 Blower/Vac/Mulcher
MAINTENANCE
Remove the plug before carrying out any
adjustment, servicing or maintenance.
Never use water or chemical cleaners to
clean your power tool. Wipe clean with a dry
cloth. Keep the motor ventilation slots clean.
Keep all working controls free of dust. If the
replacement of the supply cord is necessary,
FIGURE
this has to be done by the manufacturer or his
agent in order to avoid a safety hazard.
See Fig. A1
STORAGE
See Fig. A2
Store the Blower/Vacuum and extension cord
indoors, in a cool dry location, out of reach of
children and animals.
See Fig. C
See Fig. D
TROUBLE SHOOTING
See Fig. E
See Fig. F
See Fig. G1 &
G2 & G3
See Fig. H
See Fig. C
See Fig. I
See Fig. J1 & J2
See Fig. K1 & K2
Problems Possible
Causes
The Vacuum
Tube or the
Fan Cover is
not attached
The
to the Motor
Blower/Vac
Housing.
does not
operate.
Power cord is
not connected
to the power
source.
Debris
blocking in the
Impeller
Debris
The
blocking in
Blower/Vac
the Vacuum
jammed or
Tube or the
clogged.
connection
of the Leaf
Collection Bag
Corrective
Action
Attach the
11
Vacuum
Tube or the
Fan Cover
to the Motor
Housing.
Connect the
power cord
to a power
source.
Remove
clogged
debris from
the Impeller.
Remove
clogged
debris from
the Vacuum
Tube or the
connection
of the Leaf
Collection
Bag
EN