Step 1-A: Drill Cable Entry Hole Into Your Vehicle - weBoost DRIVE REACH FLEET Guide D'installation

______
Step 1-A: Drill Cable Entry
Hole Into Your Vehicle
Identify a location for NMO Outside Antenna on the
top of your vehicle that is:
• Near the center of the roof
• At least 12 inches away from any other antennas
• At least 6 inches away from any windows
(for best performance install on top of vehicle)
Do a 'soft install' before drilling the hole for the
cable entry.
• Set up the system by routing the cable through
an open door or window, completing the setup
instructions, verifying the system works as desired,
and then drilling the hole.
6 in. away from windows
2
PROFESSIONAL VEHICLE SIGNAL BOOSTER KIT DRIVE REACH FLEET
(including sunroofs)
Good NMO Outside
Antenna Placement