Table des Matières
Publicité
All manuals and user guides at all-guides.com
OBJ_BUCH-938-001.book Page 10 Monday, February 16, 2009 11:35 AM
10 | English
Operation
Starting Operation
Inserting the Battery
Use only original Bosch lithium ion batteries with the voltage
listed on the nameplate of your cordless worklight. Using other
batteries can lead to injuries and pose a fire hazard.
Insert the charged battery 5 from the rear into the base of the cord-
less worklight. Press the battery completely into the base until the
red stripe can no longer be seen and the battery is securely locked.
Switching On and Off
To start the cordless worklight, press the On/Off switch 2.
To switch off the cordless worklight, press the On/Off switch 2 again.
Protection Against Deep Discharging
The lithium ion battery is protected against deep discharging by the
"Electronic Cell Protection (ECP)". When the battery is empty, the
cordless worklight is switched off by means of a protective circuit.
Working Advice
Changing the Handle Position (see figure B)
The position of the handle 3 can be changed. Rotate the handle 3 un-
til it engages in one of the 4 possible positions.
1 609 929 T65 | (16.2.09)
Bosch Power Tools
Publicité
Table des Matières
