Lexmark X820e MFP Mode D'emploi page 13

3 short
Shelf support
6 medium
Beam
4 medium
Base
Note:
screws for later use.
Assembling the stand ling the stand
Shelf
Right and
left legs
Save the four remaining medium
1
4 short
2
3
4
10 medium
5
Base
support
Slide the left and right legs onto
the extensions on the base. Make
sure the screw holes are facing in.
Secure the legs to the base each
with two medium screws.
Attach the base supports:
a
Use two medium screws each
to attach the supports to the
legs.
b
Use three medium screws
each to attach the supports to
the base.
Attach the beam to the legs with
six medium screws.
Attach the shelf to the legs with
four short screws.
Attach the shelf support to the
shelf with three short screws.
Short Medium
Set up the scanner stand
Long
5