LaserLiner PowerCross-Laser 8 S Mode D'emploi page 15

– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should shut
their eyes and immediately move away from the beam.
– Tampering with (making changes to) the laser device is not permitted.
– Under no circumstances should optical instruments (magnifying glass,
microscope, binoculars) be used to look at the laser beam or reflections.
– Do not use the laser at eye level (1.40 ... 1.90 m)
– Reflective, specular or shiny surfaces must be covered whilst laser devices
are in operation.
– In public areas shield off the laser beam with barriers and partitions
wherever possible and identify the laser area with warning signs.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic compatibility regulations
and limits in accordance with the EMC Directive 2014/30/EU which is covered
by the Radio Equipment Directive 2014/53/EU.
– Local operating restrictions – for example, in hospitals, aircraft, petrol stations
or in the vicinity of people with pacemakers – may apply. Electronic devices can
potentially cause hazards or interference or be subject to hazards or interference.
– The measuring accuracy may be affected when working close to high voltages
or high electromagnetic alternating fields.
Safety instructions
Dealing with RF radiation
– The measuring device is equipped with a wireless interface.
– The measuring device complies with electromagnetic compatibility and wire-
less radiation regulations and limits in accordance with the RED 2014/53/EU.
– Umarex GmbH & CO. KG hereby declares that the PowerCross-Laser 8 S
radio equipment meets the requirements and other specifications of the
European Radio Equipment Directive 2014/53/EU (RED). The EU Declaration
of Conformity can be found in its entirety at the following address:
http://laserliner.com/info?an=AEE
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents,
scouring agents and solvents. Remove the battery(ies) before storing for
longer periods. Store the device in a clean and dry place.
PowerCross-Laser 8 S
15
EN