Functional Description - Bosch GDR 10,8 V-LI Professional Notice Originale

OBJ_BUCH-241-003.book Page 8 Thursday, October 22, 2009 10:13 AM
8 | English
Do not open the battery. Danger of short-
circuiting.
Protect the battery against heat, e. g.,
against continuous intense sunlight,
fire, water, and moisture. Danger of
explosion.
In case of damage and improper use of the
battery, vapours may be emitted. Provide
for fresh air and seek medical help in case
of complaints. The vapours can irritate the
respiratory system.
Use the battery only in conjunction with
your Bosch power tool. This measure alone
protects the battery against dangerous over-
load.
Use only original Bosch batteries with the
voltage listed on the nameplate of your
power tool. When using other batteries, e. g.
imitations, reconditioned batteries or other
brands, there is danger of injury as well as
property damage through exploding batter-
ies.

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for driving in and loos-
ening screws and bolts as well as for tightening
and loosening nuts within the respective range
of dimension.
1 609 929 T13 | (22.10.09)
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Screwdriver bit with ball catch*
2 Tool holder
3 Locking sleeve
4 "Power Light"
5 Battery unlocking button
6 Battery*
7 Rotational direction switch
8 On/Off switch
9 Handle (insulated gripping surface)
10 Universal bit holder*
11 Screwdriver bit*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Technical Data
Cordless Impact Screwdriver GDR 10,8 V-LI
Article number
Rated voltage
No-load speed
Impact rate
Maximum torque,
hard screwdriving
application according
to ISO 5393
Bolt size
Max. screw dia.
Tool holder
Weight according
to EPTA-Procedure
01/2003
Please observe the article number on the type plate
of your machine. The trade names of the individual
machines may vary.
Professional
3 601 J09 0..
V= 10.8
-1
min 0 – 1800
-1
min 0 – 3000
Nm 100
M4 – M12
mm 8
¼" hexagon
socket
kg 1.0
Bosch Power Tools