Canon imageCLASS D1650 Mise En Route page 12

Quick Setup
Configuring the Machine
Configuring Fax Settings
Before starting the configuration
If your machine does not come with
a telephone cable, have one ready, as
necessary.
Configure the fax settings, according to the screen
below.
1.
Select <Fax>.
2.
Select <Set Up Now>.
3.
Register the machine's telephone number (fax
number) and abbreviated user name.
• The information below will be printed at
the top part of the paper output from the
destination machine as sender information.
En
Fax Number
Number's Type
Sent Time
10/10 2019 10:00AM FAX
12
Unit Name Page Number
123XXXXXXX CANON 0001
For details
"Configuring Initial Settings for Fax Functions"
in the User's Guide
4.
Set the reception mode.
• Make the setting by answering the questions
on your purposes of using the fax function.
5.
Connect to a telephone line.
6.
Select <End>.
7.
Select <Yes>.
Now you are finished
with the configuration.
B
A
Telephone line jack
Telephone