Strain Relief - Siemens SIMATIC IPC427E Information Produit

Strain relief

There are two accessory packs supplied with the device containing 2 strain reliefs and screws – one strain relief for LAN
RJ45 cables and one for USB and displayport cables.
Fasten the both reliefs for USB/Displayport and LAN RJ45 to the device with the screws provided after removing the old
screws on the screw locations.
Connect the USB, DisplayPort and LAN cables and attach it on the strain relief using cable ties as shown on the following
pictures:
①
DC 24 V
②
4 x USB
③
2 x DisplayPort
④
3 x LAN RJ45
①
2 x COM
②
GND
SIMATIC IPC427E
A5E41754198-AD, 11/2017
Secure the DC 24 V input connector with the 2 integrated screws.
Secure a pair of USB connectors with one cable tie.
Secure each DisplayPort connector with a cable tie.
Secure each LAN connector with a cable tie.
Secure each COM connector with the 2 integrated screws.
Protective conductor terminal: min. 2,5 mm
2
3